I learned how to install a mosquito net (without a frame) on any plastic window

Interesting News

šŸ¤” I used to think that attaching a mosquito net without drilling or gluing was nearly impossible… šŸ¤” Until my grandfather showed me his trick. Simple, cost-effective, and efficient, his method really impressed me! Once you see how it works, you might want to use it all over your home. šŸ”āœØ āž”ļø Discover the explanation here šŸ‘‡šŸ‘‡šŸ‘‡

I learned how to secure a frameless mosquito net to any PVC window, without screws or glue. It’s easier than gluing and much cheaper than a framed version.

I learned how to install a mosquito net (without a frame) on any plastic window

A mosquito net with a frame costs around 10,000 forints, which isn’t exactly cheap. Plus, installing it requires buying special fasteners and drilling into the window, which can be complicated for some people.

I learned how to install a mosquito net (without a frame) on any plastic window

What many don’t realize is that there’s a simpler and more affordable solution, without worrying about the window’s size or shape. On top of that, this method ensures the same level of durability as expensive models, making it ideal even for cat owners.

Now, let me explain how to do it.

I learned how to install a mosquito net (without a frame) on any plastic window

Materials Needed

  • A roll of mosquito netting (available in hardware stores and supermarkets for around 2,000 to 3,000 forints).

  • A simple screwdriver.

I learned how to install a mosquito net (without a frame) on any plastic window

I personally chose a 150 x 250 cm roll, which was enough for four windows, meaning the cost per window was about 800 forints.

Step-by-Step Installation

Preparing the Mosquito Net

  1. Measure the window and cut the mosquito net to the desired size.

  2. Leave a few extra centimeters on each side (I added 3 cm, but you can add more).

I learned how to install a mosquito net (without a frame) on any plastic window

Removing the Sealing Gasket

  1. Using a screwdriver, gently lift the rubber sealing gasket and slowly remove it from the frame.

  2. Be careful not to stretch it to avoid damaging it.

I learned how to install a mosquito net (without a frame) on any plastic window

Securing the Mosquito Net

  1. Place the mosquito net over the window and make sure it’s positioned correctly.

  2. Put the sealing gasket back in place by pressing it into the groove while holding the mosquito net’s edge.

  3. Ensure the mosquito net is evenly distributed over the entire surface.

I learned how to install a mosquito net (without a frame) on any plastic window

Adjusting and Tightening

  • In corners or difficult spots, use a screwdriver: the pointed tip helps push the gasket in, while the flat end smooths it out.

  • As you replace the gasket, the mosquito net will naturally tighten. Make sure the tension is even, without wrinkles or slack.

Maintenance and Durability

  • The sealing gasket should be replaced every two years. If you accidentally damage it, don’t worry—it’s easy to find in hardware stores, and a full replacement kit only costs a few thousand forints.

I learned how to install a mosquito net (without a frame) on any plastic window

The Final Result

Visually, this mosquito net looks just as good as the framed models. It’s quick to install, budget-friendly, and requires no drilling.

For PVC windows, I believe this method is far more practical than spending tens of thousands of forints on a framed mosquito net with fixings. And if you want to install it on multiple windows, this trick will save you a lot of money.

Rate article
( No ratings yet )