“I almost flooded my bathroom, but then I discovered this surprisingly effective trick using just a plastic bottle”

Interesting News

😱 I noticed that the water wasn’t draining properly in my sink, and I was about to call a plumber 🛠🥲 But a simple trick with a plastic bottle saved me time and money! 😍 Try it at home, you’ll thank me later 😉 Discover in the article how it works! 👇

"I almost flooded my bathroom, but then I discovered this surprisingly effective trick using just a plastic bottle"
Have you ever noticed that the water in your sink, shower, or toilet drains poorly? It’s often a sign of a clog beginning to form. If you don’t act quickly, it can get worse and cause a flood… not just in your place, but also to your neighbors downstairs! Fortunately, this simple method can help you unclog it effectively, at least in the most common cases.

"I almost flooded my bathroom, but then I discovered this surprisingly effective trick using just a plastic bottle"

Why do pipes get clogged?
Most of the time, the clog forms in the trap, that little pipe that connects your drain to the plumbing. This article explains how to easily unclog it without special tools.

"I almost flooded my bathroom, but then I discovered this surprisingly effective trick using just a plastic bottle"

No plunger on hand? No worries!
If you don’t have a plunger, there’s no need to rush to the store. With just a 2-liter plastic bottle, you can make your own homemade plunger in a few minutes.

"I almost flooded my bathroom, but then I discovered this surprisingly effective trick using just a plastic bottle"

How to turn a bottle into a makeshift plunger?
Prepare the bottle: Cut the bottom off a plastic bottle, removing about one-third. Use a knife to start the cut, then finish with scissors for more precision.
Create a handle: Keep the top part of the bottle, the one with the cap. This will serve as the handle, just like on a regular plunger.

"I almost flooded my bathroom, but then I discovered this surprisingly effective trick using just a plastic bottle"

How to use it?
Fill the bottle: Before using it, fill the bottle with water to replace the air inside.
Position it on the clogged drain: Place the cut opening directly on the drain to be unclogged.

"I almost flooded my bathroom, but then I discovered this surprisingly effective trick using just a plastic bottle"

Pump vigorously: Holding the cap like a handle, perform up-and-down movements to create pressure. Make sure the bottle stays submerged to maximize the effect.
Check the result: If the clog was light, the water should quickly start draining normally again.

"I almost flooded my bathroom, but then I discovered this surprisingly effective trick using just a plastic bottle"

A few precautions to keep in mind:
This method works best on recent and not-too-resistant clogs.

For tougher clogs (grease, hair, thick residues), a plumber’s snake or a real plunger may be necessary.

"I almost flooded my bathroom, but then I discovered this surprisingly effective trick using just a plastic bottle"

Regular pipe maintenance can help prevent major clogs in the future.

A simple trick, but incredibly effective! Keep it in mind, it could save you when no plumber is available!

Rate article
( No ratings yet )